| « MRRC & Monogram | Scalextric World Championship 2012 » |
Racer Daytona Prototypes
Race results;
Geoffrey P, Dallara 169 laps
Hugh H, Riley 168 laps
Bob K, Riley 168 laps
Joe R. Sr. Riley 164 laps
John R, Riley 164 laps
Bill W, Dallara 157 laps
Rich P, Dallara 152 laps
Sideways Daytona Prototype
August 8. Wednesday night start time 7:00PM
-Running Voltage: 12V DC
-Running Track: Scalextric 1.
-Fuel Management: No.
-Cars Allowed: Racer Sideways, Daytona Prototype.
-Chassis: Modifications Allowed, spring suspension allowed, Slot.it parts only.
-Body: Custom Paint Allowed, must have interior.
-Gears: Modifications Allowed, Store parts only.
-Bushings: Modifications Allowed, Store parts only.
-Wheels/Axle: Modifications Allowed, In store parts only.
-Tires: NSR, scaleauto, slot.it, super tires or yellow dogs. May be Sanded. No Tire Treatments Allowed.
-Lead Wire: Modifications allowed.
-Electrical: Motor Noise Filter Not Required.
-Magnet: No Magnet.
-Motor: Slot.it orange endbell 21.5K motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: Gear must not scrap track.
-Guide Blade: Modifications Allowed. NSR, scaleauto or slot.it parts only. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.