Overall Track Shot:

The New Bridge:

The New Infield:

-Running Voltage:  12V DC
-Running Track:  Ninco
-Fuel Management:  No.
-Cars Allowed:  Ninco GT and Megane
-Chassis:  Modifications Allowed, Ninco stock or lexan allowed.
-Body: Custom Paint Allowed, must have interior.
-Gears:  Modifications Allowed, Ninco standard or 1/32 allowed.
-Bushings:  Modifications Allowed, Ninco parts only.
-Wheels/Axle:  Modifications Allowed, Ninco parts only.
-Tires:  Ninco only.  May be Sanded.  No Tire Treatments Allowed.
-Electrical:  Motor Noise Filter Not Required.
-Magnet:  No Magnet.
-Motor: Ninco NC-5 motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: .040.
-Guide Blade:  Modifications Allowed. Ninco parts only. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.

Race results;

R. Kuss            191 laps
G. Powell        190 laps
H. Hampton  185 laps
C. Chubbuck  183 laps
J. Rose Jr.       183 laps
D. Cloud           181 laps
Rich P.              177 laps
Jacob L.           177 laps
J. Rose              170 laps
Jordan L.         166 laps

In Our continuing endeavor to bring you new and exciting tracks, we present you the Hill Climb Track!

With the help of Chris C., Sunday Aug 22 we opened the Hill Climb Track, complete with Digital Camera Lap Timing System, the same technology used to monitor traffic and intersections all over the world.  Keeping score and timing your laps on the back end is the reliable PC Lap Counter!

With Approximately 50' of climbing, winding, and dipping Scalextric, NINCO, and SCX Track, This track is sure to present a challenge to even the most experienced Rally Racer!

-Running Voltage:  12V DC
-Running Track:  Ninco
-Fuel Management:  No.
-Cars Allowed:  Pioneer mustangs.
-Chassis:  Modifications Allowed.
-Body: Custom Paint Allowed, must have interior.
-Gears:  Modifications Allowed, 1/32 parts only.
-Bushings:  Modifications Allowed.
-Wheels/Axle:  Modifications Allowed, 1/32 parts only.
-Tires:  Rubber or store stock available.  May be Sanded.  No Tire Treatments Allowed.
-Electrical:  Motor Noise Filter Not Required.
-Magnet:  No Magnet.
-Motor: Stock 18K motor,  motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: .040.
-Guide Blade:  No Modifications Allowed. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.

-Running Voltage:  12V DC
-Running Track:  Ninco
-Fuel Management:  No.
-Cars Allowed:  Scalextric GT cars,  modern or older prototypes, GT40 allowed.
-Chassis:  No Modifications Allowed.
-Body: Custom Paint Allowed, must have interior.
-Gears:   Modifications Allowed to replace stock 11T pinion for sidewinder and 9T pinion for in-line only, slot.it parts allowed.
-Bushings: Modifications Allowed, plastic or brass.
-Wheels/Axle:  No Modifications Allowed.
-Tires:  Rubber, yellow dogs or silicone.  May be Sanded.  No Tire Treatments Allowed.
-Electrical:  Motor Noise Filter Not Required.
-Magnet:  No Magnet.
-Motor:  Scalextric 18K only,  motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: .040.
-Guide Blade:  No Modifications Allowed. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.

-Running Voltage:  12V DC
-Running Track:  Ninco, Scalextric combined.
-Fuel Management:  Yes.
-Cars Allowed:  Slot.it, NSR and Ninco.
-Chassis:  Modifications Allowed.
-Body: Custom Paint Allowed, must have interior.
-Gears:  Modifications Allowed, any Slot.it, NSR and Ninco.
-Bushings: Modifications Allowed, any Slot.it, NSR and Ninco.
-Wheels/Axle: Modifications Allowed, any Store (SCC), Slot.it, NSR and Ninco.
-Tires:   Super tires, Slot.it, NSR and Ninco  May be Sanded.  No Tire Treatments Allowed.
-Electrical:  Motor Noise Filter Not Required.
-Magnet:  No Magnet.
-Motor: Ninco NC-6 or NC-12,  Slot.it orange endbell, Flat 6 22K, NSR Shark 20K, King 21K. motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: .040.
-Guide Blade:  Modifications Allowed any Slot.it, NSR and Ninco. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.

Race Results;
R. Kuss       87 laps
J. Ricci      86 laps
G. Powell     86 laps
J. Rose Jr.   85 laps
H. Hampton    83 laps
C. Chubbuck   83 laps
Rich P.       79 laps
J. Rose       78 laps
L. Jordan     76 laps
H. Bigelow    73 laps

-Running Voltage:  12V DC
-Running Track:  Ninco
-Fuel Management:  No.
-Cars Allowed:  Ninco classics;  ie; testarossa, cobra, corvette, jaguar, porsche.
-Chassis:  No Modifications Allowed.
-Body: Custom Paint Allowed, must have interior.
-Gears:  No Modifications Allowed.
-Bushings:  No  Modifications Allowed.
-Wheels/Axle:  No Modifications Allowed, stock replacement wheels only.
-Tires:  Ninco only.  May be Sanded.  No Tire Treatments Allowed.
-Electrical:  Motor Noise Filter Not Required.
-Magnet:  No Magnet.
-Motor: Ninco NC-1 or NC-8,  motor must have undamaged metal tabs. Cutting the shaft is allowed. No chemical additives to the motor (ex: voodoo drops) or other motor modifications allowed.
-Weight: Weight Allowed, interior only.
-Vehicle Ground Clearance: .040.
-Guide Blade:  Modifications Allowed. Ninco parts only. May use any 1/32 manufactures braid. No chemical additives to the braids (ex: voodoo drops).
If it does not indicate above that it's allowed, it's not allowed
-House rules apply.

Race Results;

J. Ricci ........129 laps
G. Powell..... 126 laps
H. Bigelow ...125 laps
J. Rose Jr.... 124 laps
T. Tana........ 124 laps
J. Rose ........123 laps
L. Jordan ....122 laps
H. Hampton 114 laps
Dom............107 laps